High quality cutting belts
Different shore hardness, nearly every dimension and thickness, standards & special solutions
Next to cutting boards on several cutting systems cutting belts are used, which have two functions :
a. materialtransport
b. cutting board
These are two opposite properties as on one hand the belt must be hard as possible in order to be a good partner for the cutting knife, on the other hand it should be flexible enough to be able to be a belt. We found the highest possible compromise with our on Suteau machines used belt.
Different machine supplier use different cutting belts, Suteau use a 3,5 mm belt with a shore hardness D of 85 and with this belt it is possible to cut most of the soft materials. We try to offer a wide range of cutting belts beside this Suteau belt, so that we can offer belts for every type of machine.
We are offering following qualities as a standard
| type | thickness | length | width | welding |
|---|---|---|---|---|
| Nylon-textil belt for example Suteau cutting systems | 3,5 mm | according to your wish | up to 2.500 mm | on the machine or ready as a endless belt |
| Nylon-textil belt for example Suteau cutting system | 3,5 mm | according to your wish | up to 2.500 mm | on the machine or ready as a endless belt |
| Paper belt | 0,6 — 1,2 mm | on a role, min. 30 m | different width, depend on the quality | will be taped on the machine easily |
| XVT-2249 | standard | according to your wish | different width | on the machine or ready as a endless belt |
| STAR 85 nature | 0,3 — 0,8 mm | 50 m role | 1000 mm | will be taped on the machine easily |
| STAR STB nature | 0,35 — 0,5 mm | on a 110 m role | up to 1400 mm | will be taped on the machine easily |
We have additional options, please contact us and give us your wish !
We would be really pleased to consult you about the right quality for your application and machine.